SHIMANO STELLA 2025 SW - NEW

Each drag part that withstands the fierce running is made of metal and abrasion-resistant carbon washers made exclusively for Stella SW. In addition to the drag washers that were previously placed at the bottom, the spool structure has been improved to allow for larger washers to be installed at the top.

This evolution has improved drag durability.

Thanks to the evolution of the drag structure and the synergistic effect of the heat sink drag, we have succeeded in reducing the loss of drag force due to heat by approximately 30% compared to previous models.

This technology improves the casting distance, casting feeling, and drag smoothness by winding the line methodically and precisely. There are three notable focus points. The first is the optimal winding pitch for SW models. This model is wound densely, with the pitch narrowed to about half that of the previous model. It provides a smooth casting feel and thoroughly suppresses line trouble. In addition, the dense winding reduces the number of times the line moves up and down when the drag is activated, allowing for smooth release.

The second improvement is the shape of the line wound around the spool. By reviewing the turning angle of the worm shaft, the bulges that tend to form on both the top and bottom ends of the spool have been made flatter, reducing resistance when releasing the line and dragging, and also reducing problems.

And the third is the 2-speed oscillation system, which changes the winding pitch when the spool moves back and forth. When the line is released from the spool ring side to the skirt side (downward), the finely wound line reduces release resistance and increases casting distance, while in the opposite direction, the coarsely wound line prevents the line from getting caught at high drag. This well-thought-out mechanism for a SW model further improves line release performance and reduces trouble.

The fins are placed close to the line roller to reduce line slack and prevent the line from falling onto the spool skirt. The fins are made of elastic material to prevent damage when winding the knot.

Fin B, which creates a gap as before, is also included.

The AR-C spool has a special shape for the spool ring, which creates a line streamlining effect, helping to reduce line trouble and improve long-distance casting performance. The 25 Stella SW is equipped with a new AR-C shape that improves the spool ring collar to make it less likely for the line to ride on it, reducing the line strangling the spool, which can cause line trouble.

In addition, in SW fishing, the spool ring is subjected to more stress than you can imagine under harsh conditions. The surface of the spool ring is coated with a strong abrasion-resistant barrier coat, further improving durability. It also reduces damage to the line, and the surface condition remains smooth and less susceptible to scratches for a longer period of time.

If the ring surface is damaged, you can replace the ring only. *Shimano after-sales service

The biggest threat to SW fishing is seawater intrusion. Seawater that gets inside the reel corrodes the metal parts and significantly reduces the initial performance.

Stella SW is sealed in various places, including the body, drag knob, and line roller, to prevent water from entering. In particular, the body and stopper parts have achieved IPX8 waterproofing standards. This provides high reliability and durability for SW games played under harsh conditions.

In addition, the waterproof structure has been revised to provide a lighter rotation performance while still maintaining waterproof performance. This achieves the contradictory elements of high waterproof performance and silky rotation.